PANASONIC GAS ENGINE SERVICE
We were asked to demonstrate the benefits of Closed Transition Star/Delta Soft Starting vs the standard Open Transition Star/delta Soft Starting for Peak Rate Billing on a Building in London.
We were asked to demonstrate the benefits of Closed Transition Star/Delta Soft Starting vs the standard Open Transition Star/delta Soft Starting for Peak Rate Billing on a Building in London.
Like all trades in these uncertain times, we are struggling to get deliveries of any and every serviceable item, especially if there is a microchip involved; it’s a spare parts crisis.
Long after Johnson Controls had given up on the York Sequencer Commander, we here at Orlando can still support the maintenance on this piece of equipment.
BITZER SCREW COMPRESSOR BURNOUT WORKS We were tasked to carry out an inspection of a failed Bitzer Compressor. It soon became apparent that the compressor
After extensive training at Robur Italy, we are one of the few Robur Service Agents trained to break into Robur Sealed System to carry out repairs.
McQUAY SCREW COMPRESSOR SEAL CHANGE During routine PPM Tasks, we found a refrigerant leak on the Motor Housing where it connects to the main screw
AIREDALE PLATE HX REPLACEMENT After a successful similar project Plate Heat Exchanger, we had the knowledge to repeat the challenge. Again, we carried out an
HITACHI SCREW COMPRESSOR INSPECTION During routine PPM Tasks we noticed a bearing noise on the running compressor. We recommended a strip-down inspection on the compressor
CAREL PCO5+ HARDWARE Orlando RAC were asked to retrofit a Denco Downflow Unit’s failed controller with the latest Carel PCO5+ Hardware. The customer specified 2
TREND IQVIEW8 USER INTERFACE Orlando RAC was asked to retrofit a Trend IQView8 User Interface (UI) to one of our customers sites. Primarily site wanted
83 High Street
Hemel Hempstead
Hertfordshire, HP1 3AH
PO Box 1533
83 High Street
Hemel Hempstead
Hertfordshire, HP1 9QY
Email: info@orlandoaircon.co.uk
Tel: +44 (0) 3300884720